***Plug n Play Kit required***
SPECIFICATIONS:
High Speed/ High torque Brushless Servo
Voltage: 4.8V - 9V
No Programing required
No Bec required
Internal: Steel Gears / All CNC Aluminum Casing
Bearing Type: 3 Ball Bearings
Weight: 83g
Water Resistant: 7 Point Seal
Dimensions: 1.57 x .78 x 1.46 (LWH)
Torque: 222oz @ 6v/ 270oz @7.4v/ 320oz @8.4v
Speed: .07sec @6v/.06sec @7.4v/.05sec @8.4v
Spline: 25T
Dead Band Width: 2¦Ìs
 
NOTE: - Always adjust the endpionts first prior to connecting the links and mounting the servo horns to make sure there's no binding (humming noise).NO SBEC REQUIRED.TIPS N TRICKS:- Set endpoints at 50%-50% WITHOUT the servo horn(s) on. When done mount the servo horns and connect the levers and set the endpoints so that the servo(s) don't bind.- Use our short high torque servo horn.
- For best hopping results us a limited slip driveshaft.
- To produce the best hop Use our rc pro hopper shocks
 USE 12v AT YOUR OWN RISK
WE ARE NOT RESPONSIBLE FOR BURNED OUT OR LOCKED UP SERVOS DUE TO IMPROPER HANDLING AND INCORRECT ENDPOINT SETTINGS!!