The True Hop Super Pump servo is specially developed to give your car some extra hopping power using a 10A BEC set at max. 8.4V.Powered by AGFRC!I do NOT recommend using these servo's on the rear of your RC Lowrider when there's a lot of weight in the trunk. These servo's are designed for crazy fast action and not for lifting a lot of weight in combination with a long servo horn. Please use the dedicated GatePumps for that prupose.Specs:Voltage: 7.4V- 8.4V Do not exceed!Gears: Super Steel GearsBearing: 3 HQ Ball BearingsOperating Temperature: -15°C - +70°CPulse / Frequency: 1520uS/ 333HzOperating Speed:0.044sec/60° @ 7.4V 0.039sec/60° @ 8.4VStatic Holding Torque: 17.5 kg-cm (243 oz-in) @ 7.4V 19.5 kg-cm (271 oz-in) @ 8.4VSize: 40*20*37.2mm 1.57*78*1.46inchMotor Type: BrushlessSpline: 25T/ Dead Band Width 2uSecFor Best results:- Use a good set of stiff shocks to make sure the car doesn't bottom out as easy.- Mount the servo with servo horn facing forward.- Make the first hole on the servo horn large enough so that it fits the ball link.- Use a 5.5mm hole to hole servo linkage.- Plug the servo in the receiver with the front switch down.- Set the endpoints to 50%, mount the horn and adjust untill there's no humming noise.NOTE:- These super fast servo's are for experienced users only! - Always adjust the endpionts to make sure there's no binding (humming noise).- More speed means more heat! Let these servo's cool down in between hopping sessions.WARRANTY DOES NOT COVER BURNED OUT SERVOS!!BURNED OUT SERVOS ARE CAUSED BY INCORRECT ENDPOINTS SETTINGS AND/OR THE SERVO HORN GETTING STUCK BY SOMETHING LIKE A LOSE BOLT OR WIRING.
***can take up to 7-10 days to be shipped out***